Build a wood house
1. Basic description of the construction
The house is assembled from prefabricated, full-width timber frame panels (wall units). These panels are made in accordance to the documentation of VS DOMY,a.s. and also to the construction documentation of a particular house. In case of a difference between these two documentations, the documentation of VS DOMY,a.s. is valid.
2. Terrain modifications, foundations
If not otherwise stated, terrain modifications, supporting plate incl. its finish and service connections, chimney, external access ways or stairways etc. are performed by the customer. The customer has to ensure also ground-water and radon insulation between the cellar (foundations) and the first floor.
3. Composition of walls and floors
3.1 Exterior walls
Loaded exterior walls are produced as a timber frame construction according to the static calculation. The composition of the wall (interior to external side):
15 mm FERMACELL plate
0,2 mm PE-foil (vapour barrier)
140,0 mm timber frame construction with 140,0 mm thermal insulation
15 mm FERMACELL plate
60,0 mm thermal insulation plate
4-5 mm plaster incl. installation net and putty
3.2.Interior walls
Loaded interior walls
15 mm FERMACELL plate
140,0 mm timber frame construction with 140,0 mm thermal insulation
15 mm FERMACELL plate
Other interior walls
15 mm FERMACELL plate
75,0 mm timber frame construction with 75,0 mm thermal insulation
15 mm FERMACELL plate
3.3. Ceiling body
The composition of the ceiling body (from upper side down):
floor system (see 3.5.)
15,0 mm OSB plate
240,0 mm timber ceiling beam with 75,0 mm thermal/noise insulation
0,2 mm PE-foil (vapour barrier)
12,0 mm OSB plate
15,0 mm gypsum plasterboard
3.4. Deck of the 1st floor
The composition of the floor body (from upper side down):
floor system (see 12.)
20,0 – 25,0 mm FERMACELL plate
thermal insulation - 60,0 – 100,0 mm according to the foundations type
20,0 mm FERMACELL fill
0,4 mm special foil against residual moisture on the supporting plate
3.5. Decks of the 2nd (3rd, 4th,…) floor
The composition of the floor body (from upper side down):
floor system (see 12.)
20,0 mm FERMACELL plate
10,0 - 15,0 mm plate - footfall sound absorber
30,0 mm fill - footfall sound absorber
3.6. Roof design, roof covering, rainwater goods
The composition of the roof (from upper side down):
concrete roof tiles
40,0 – 50,0 mm roof battens (according to roof inclination)
40 mm counter battens
diffusion foil – safety waterproof layer
rafters according to static conditions with thermal insulation 160 mm
80 mm wooden lath with thermal insulation 80 mm
0,2 mm PE-foil (vapour barrier)
12,5 mm gypsum plasterboard
Draining of the roof is performed by circular-shaped gutters and outside located downpipes in titanium-zinc leading down to supporting plate. End lap of the roof edge makes ca 600 mm (or ca 500 mm at gable side) with timber profile finish at bottom side.
4. Windows / terrace doors
As the standard equipment, we use plastic windows with double glazing unit (U=1,1 Wm-2K-1), with five-chamber frame/window profile and full-circumference metal fittings. Windows can be opened, closed or tipped to micro-ventilation position. For extra charge, we can deliver windows in special colors, shapes, with divided glass or timber windows made from EURO 68 profiles.
As to dormer windows, we equip our houses with timber windows ROTO. For extra charge, we can deliver plastic dormers ROTO, VELUX dormers and full range of accessories.
5. Blackout jalousie, window-shutters
For extra charge, we can deliver all the lamella types of jalousie (plastic or aluminium) in casing with thermal insulation and revision cover built in cladding panel, or jalousie in arched casing built in facade
Window-shutters are available in plastic or timber according in accordance to the window material.
6. Window sills (parapets)
External parapets are made of titan-zinc. Interior parapets are made of Postforming. For extra charge, it is possible to deliver stone parapets.
7. Main door
Plastic front doors are delivered in solid core execution or glass door (with double glazing units) execution with ornament and security smithing and security lock. Door is equipped with handle and knob. Standard frame and door has 5-chamber profile. Design of the door is available according to the offer of VS DOMY a.s. (U = 1,10-1,24 Wm-2K-1), as well as range of timber front door.
Sapeli Standard internal doors are delivered in oak, mahogany or beech veneer with veneer door casing and with shine or dull handles. Many other types of door are available incl. special fireproof door, massive door, shift door, folding door etc.
8. Interior stairways
Standard stairway is designed opened and completely beech massive. Many other types of stairway are available in different finish, shapes, materials and accessories. Access to ceiling can be equipped with collapsible stair and thermal insulation.
9. Electrical accessories and connections
Standard equipment:
Living room, bedroom
1-2 connections for light with switch
2-5 plugs
(according to acreage of the room)
Kitchen, kitchenette
1-2 connections for light with switch
3-5 plugs
1 connection for cooker, fridge, dishwasher, cooker hood
Bathroom
1-2 connections for light with switch
1 plug for light on wall
1 plug for washing-machine
Toilet
1 connection for light with switch
1 connection for ventilator
1 plug
Workshop
1 connection for light with switch
1 plug for washing-machine (if situated here), dryer or ventilator
3 plugs
Hall
1-2 connections for light with switch
1-2 plugs
(according to length of the hall)
Terrace
1 connection for light with switch
Entrance
1 connection for light with switch
1 connection for bell
Ceiling room
1 connection for light with switch
1 plug
Other standard equipment
1 plug 380 V
1 plug AP
2 TV connections with 2 cases + interior wiring without plugs
2 phone connect. with 2 cases + interior wiring without plugs
1 consumer unit type HAGER incl. connection
Note
Warning device, data-transfer net, interior phone wiring and similar systems are available for extra charge.
10. Heating
Our houses are equipped with warm-water heating with central regulation and plate type heating bodies with thermo-regulating valves. Distribution tubes are made of plastic. Hanging gas (or electric) heating boiler is equipped with tank.
Direct heating systems, underfloor heating, heat pump, solar panels, hot-air heating etc. available for extra charge.
11. Sanitary fittings and equipment
Water supply is made in plastic tubes incl. warm water circuit. Connection for garden water tap, kitchen and bathroom connections (for washing machine, dishwasher, kitchen sink) are delivered in standard, hot and could water supply is leaded to kitchen, bathroom and toilet.
Water meter, press regulator incl. filtration system is available for extras charge.
Standard sanitary fittings equipment (standard colour white):
Bathroom
Metal bathtub 170/70 cm, with lever-operated mixing valve + pendant shower bath
Basin - china type, with lever-operated mixing valve
Pendant toilet bowl with close-coupled cistern
Toilet
Pendant toilet bowl with close-coupled cistern
Basin - china type, with lever-operated mixing valve
Shower bath, enclosures, angle basins, valves and taps and other equipment in many types available for extra charge.
12. Floor covering
Pavement – on air lock, kitchen, toilet and bathroom floor area, standard price 9-10 EUR/m2 (without VAT)
Carpets – on living room floor area, ended by gripper strip (wooden or plastic), standard price 9-10 EUR/m2 (without VAT)
Type of floor coverings can be adapted according to customer’s wish (laminate, PVC, cork or similar coverings).
13. Walls and ceilings finish
Papering + painting – standard finish of all the rooms excl. areas covered by tiles:
Bathroom + Toilet – ceramic wall tiling up to ceiling (standard price 9-10 EUR/m2 without VAT) accepted by customer
Kitchen – ceramic wall tiling between shelves (standard price 9-10 EUR/m2 without VAT) accepted by customer
Many other types of cover (textile hanging, lining, plaster coat etc.) are available on customer’s wish.
1. Basic description of the construction
The house is assembled from prefabricated, full-width timber frame panels (wall units). These panels are made in accordance to the documentation of VS DOMY,a.s. and also to the construction documentation of a particular house. In case of a difference between these two documentations, the documentation of VS DOMY,a.s. is valid.
If not otherwise stated, terrain modifications, supporting plate incl. its finish and service connections, chimney, external access ways or stairways etc. are performed by the customer. The customer has to ensure also ground-water and radon insulation between the cellar (foundations) and the first floor.
3. Composition of walls and floors
3.1 Exterior walls
Loaded exterior walls are produced as a timber frame construction according to the static calculation. The composition of the wall (interior to external side):
0,2 mm PE-foil (vapour barrier)
140,0 mm timber frame construction with 140,0 mm thermal insulation
15 mm FERMACELL plate
60,0 mm thermal insulation plate
4-5 mm plaster incl. installation net and putty
3.2.Interior walls
Loaded interior walls
15 mm FERMACELL plate
140,0 mm timber frame construction with 140,0 mm thermal insulation
15 mm FERMACELL plate
Other interior walls
15 mm FERMACELL plate
75,0 mm timber frame construction with 75,0 mm thermal insulation
15 mm FERMACELL plate
3.3. Ceiling body
The composition of the ceiling body (from upper side down):
15,0 mm OSB plate
240,0 mm timber ceiling beam with 75,0 mm thermal/noise insulation
0,2 mm PE-foil (vapour barrier)
12,0 mm OSB plate
15,0 mm gypsum plasterboard
3.4. Deck of the 1st floor
The composition of the floor body (from upper side down):
20,0 – 25,0 mm FERMACELL plate
thermal insulation - 60,0 – 100,0 mm according to the foundations type
20,0 mm FERMACELL fill
0,4 mm special foil against residual moisture on the supporting plate
3.5. Decks of the 2nd (3rd, 4th,…) floor
The composition of the floor body (from upper side down):
floor system (see 12.)
20,0 mm FERMACELL plate
10,0 - 15,0 mm plate - footfall sound absorber
30,0 mm fill - footfall sound absorber
3.6. Roof design, roof covering, rainwater goods
The composition of the roof (from upper side down):
concrete roof tiles
40,0 – 50,0 mm roof battens (according to roof inclination)
40 mm counter battens
diffusion foil – safety waterproof layer
rafters according to static conditions with thermal insulation 160 mm
80 mm wooden lath with thermal insulation 80 mm
0,2 mm PE-foil (vapour barrier)
12,5 mm gypsum plasterboard
Draining of the roof is performed by circular-shaped gutters and outside located downpipes in titanium-zinc leading down to supporting plate. End lap of the roof edge makes ca 600 mm (or ca 500 mm at gable side) with timber profile finish at bottom side.
As the standard equipment, we use plastic windows with double glazing unit (U=1,1 Wm-2K-1), with five-chamber frame/window profile and full-circumference metal fittings. Windows can be opened, closed or tipped to micro-ventilation position. For extra charge, we can deliver windows in special colors, shapes, with divided glass or timber windows made from EURO 68 profiles.
As to dormer windows, we equip our houses with timber windows ROTO. For extra charge, we can deliver plastic dormers ROTO, VELUX dormers and full range of accessories.
For extra charge, we can deliver all the lamella types of jalousie (plastic or aluminium) in casing with thermal insulation and revision cover built in cladding panel, or jalousie in arched casing built in facade
Window-shutters are available in plastic or timber according in accordance to the window material.
6. Window sills (parapets)
External parapets are made of titan-zinc. Interior parapets are made of Postforming. For extra charge, it is possible to deliver stone parapets.
7. Main door
Plastic front doors are delivered in solid core execution or glass door (with double glazing units) execution with ornament and security smithing and security lock. Door is equipped with handle and knob. Standard frame and door has 5-chamber profile. Design of the door is available according to the offer of VS DOMY a.s. (U = 1,10-1,24 Wm-2K-1), as well as range of timber front door.
Sapeli Standard internal doors are delivered in oak, mahogany or beech veneer with veneer door casing and with shine or dull handles. Many other types of door are available incl. special fireproof door, massive door, shift door, folding door etc.
8. Interior stairways
Standard stairway is designed opened and completely beech massive. Many other types of stairway are available in different finish, shapes, materials and accessories. Access to ceiling can be equipped with collapsible stair and thermal insulation.
9. Electrical accessories and connections
Standard equipment:
Living room, bedroom
1-2 connections for light with switch
2-5 plugs
(according to acreage of the room)
Kitchen, kitchenette
1-2 connections for light with switch
3-5 plugs
1 connection for cooker, fridge, dishwasher, cooker hood
Bathroom
1-2 connections for light with switch
1 plug for light on wall
1 plug for washing-machine
Toilet
1 connection for light with switch
1 connection for ventilator
1 plug
Workshop
1 connection for light with switch
1 plug for washing-machine (if situated here), dryer or ventilator
3 plugs
Hall
1-2 connections for light with switch
1-2 plugs
(according to length of the hall)
Terrace
1 connection for light with switch
Entrance
1 connection for light with switch
1 connection for bell
Ceiling room
1 connection for light with switch
1 plug
Other standard equipment
1 plug 380 V
1 plug AP
2 TV connections with 2 cases + interior wiring without plugs
2 phone connect. with 2 cases + interior wiring without plugs
1 consumer unit type HAGER incl. connection
Note
Warning device, data-transfer net, interior phone wiring and similar systems are available for extra charge.
10. Heating
Our houses are equipped with warm-water heating with central regulation and plate type heating bodies with thermo-regulating valves. Distribution tubes are made of plastic. Hanging gas (or electric) heating boiler is equipped with tank.
Direct heating systems, underfloor heating, heat pump, solar panels, hot-air heating etc. available for extra charge.
11. Sanitary fittings and equipment
Water supply is made in plastic tubes incl. warm water circuit. Connection for garden water tap, kitchen and bathroom connections (for washing machine, dishwasher, kitchen sink) are delivered in standard, hot and could water supply is leaded to kitchen, bathroom and toilet.
Water meter, press regulator incl. filtration system is available for extras charge.
Bathroom
Metal bathtub 170/70 cm, with lever-operated mixing valve + pendant shower bath
Basin - china type, with lever-operated mixing valve
Pendant toilet bowl with close-coupled cistern
Toilet
Pendant toilet bowl with close-coupled cistern
Basin - china type, with lever-operated mixing valve
Shower bath, enclosures, angle basins, valves and taps and other equipment in many types available for extra charge.
12. Floor covering
Pavement – on air lock, kitchen, toilet and bathroom floor area, standard price 9-10 EUR/m2 (without VAT)
Carpets – on living room floor area, ended by gripper strip (wooden or plastic), standard price 9-10 EUR/m2 (without VAT)
Type of floor coverings can be adapted according to customer’s wish (laminate, PVC, cork or similar coverings).
13. Walls and ceilings finish
Papering + painting – standard finish of all the rooms excl. areas covered by tiles:
Bathroom + Toilet – ceramic wall tiling up to ceiling (standard price 9-10 EUR/m2 without VAT) accepted by customer
Kitchen – ceramic wall tiling between shelves (standard price 9-10 EUR/m2 without VAT) accepted by customer
Many other types of cover (textile hanging, lining, plaster coat etc.) are available on customer’s wish.
No comments:
Post a Comment